Rock Drill Oil and Lube
Hammer oil or lube is a necessity to protect against wear, rust, and corrosion. Givens International Drilling Supplies offers several types of hammer oil and lube including Castrol rock drill oil, Matex rock drill oil, Inpol Lube, and Numa Lube. Contact us today to purchase hammer oil or lube.
Castrol Rock Drill Oil
Castrol rock drill oil is available in two ISO grades: 460 for summer and 220 for winter. Both grades are available in 5 gallon pails and 55 gallon drums. See the product data sheets and material safety data sheets below or contact us for more information.
|5 Gallon Pail Part #||67567||65557|
|55 Gallon Drum Part #||67569||65559|
|Product Data Sheet||Download||Download|
|Material Safety Data Sheet||Download||Download|
Matex Rock Drill Oil
Matex rock drill oil, an environmentally safe vegetable oil based lubricant, is available in 5 gallon pails and 55 gallon drums. See the product data sheet or contact us for more information.
Inpol Lube is an environmentally friendly lubricant for DTH hammers. This non-toxic compound is very durable and economical and is available in 10 oz. cartridges. For 3” - 6” hammers, only 2 - 3 ounces of compound is required for every 300’ or for every 3 hours of continuous drilling. Contact us or see the product data sheet and material safety data sheet for more information.
Numa Enviro Lube
Numa Enviro Lube adhered to the internal components better, and the “coating” or “film” left on these components, on average, lasted 30% longer than the former Numa Lube. Numa Enviro Lube comes in a 10 oz. cartridge, and there are (20) cartridges in a case. They look identical to a tube of caulking, and the cartridge is put into a caulking gun. The tip of the cartridge is cut off and you inject 5 squeezes to release 2 – 3 ounces of Numa Enviro Lube into the Backhead of the Hammer. This 2 – 3 oz amount is good for 300 feet of drilling, or 4 hours of drilling, whichever comes first.